LUCELLINO TABLE by Ingo Maurer
Prices incl. VAT plus shipping costs
Delivery time 6-12 Workdays
- Order number: SW11216
LUCELLINO TABLE by Ingo Maurer
Light as a little bird, Lucellino by Ingo Maurer brings light into the room. The handmade pair of wings made of goose feathers sits directly on the E27 base. The name is a play on words: In Italian, luce means light and uccellino means little bird.The LED version of the Lucellino is almost indistinguishable from the original halogen version. The light source is equipped with sophisticated LED technology. When dimming, the light color changes to a warm red tone. The bulb is made exclusively for Ingo Maurer, only usable in Lucellino LED. The red cable is soldered to the bulb. Not suitable for rooms with high humidity.
While usual dimmable LEDs simply become less bright when dimmed down, this bulb also changes the light color (2000 - 2700 K). The brightly shining area in the glass bulb becomes slightly reddish, and it is actually in the center of the bulb, not in the base as is so often the case with other manufacturers. In defining the color rendering, Toshiba Materials has taken the spectrum of sunlight as a model. The new LED bulb for the Lucellino LED is therefore the first truly full replacement for all incandescent lamp lovers, hardly distinguishable from a halogen bulb and a technological masterpiece.
Materials: Handmade wings of goose feathers, brass, glass, plastic.
Dimmability: Infinitely dimmable with sliding dimmer.
Primary voltage: 100 - 240V
Secondary voltage: 12V
Color rendering: >90 Ra
Power: 5W
Light color: 2000-2700K (warm white)
Luminous flux: 380lm
Bulb type: With LED bulb, made exclusively for Ingo Maurer
Socket: E27 base
A few information about the technical data
- What is luminous flux?
The luminous flux Φ - measured in lumens (lm) - is the light output of a light source. It describes the power emitted by the light source in all directions in the visible range. To get a rough idea of what this value means, here are a few comparisons:
Candle: 12lm
230V halogen bulb with base GU10, 50W: 345lm
230V halogen bulb with base G9, 60W: 740lm
12V halogen bulb with socket GX5.3 (GU5.3), 35W: 450lm
12V halogen bulb with socket GX5.3 (GU5.3), 50W: 720lm
12V halogen bulb with base G4, 20W: 257lm
12V halogen bulb with base GY6.35, 50W: 840lm
230V halogen rod with base R7s, 100W: 1200lm
- What does color temperature mean?
Roughly speaking, the color temperature indicates how warm or cold especially white light is. The oneness is Kelvin (K). The lower the Kelvin value, the warmer the light gets. The light of a commercial light bulb here would correspond to about 2700K, a candle has about 1500K. The higher the Kelvin value becomes, the colder the blue becomes the light. Daylight is compared with about 7000K. A rough classification of the light color is:
- 2,700 to 3,250 Kelvin: warm white
- 3,250 to 5,250 Kelvin: neutral white
- 5,250 to 8,000 Kelvin: daylight white
- What does the color rendering index called RA or CRI?
The color rendering index indicates the degree of correspondence of the seen body color with its appearance under the respective reference light source. The smaller the deviation, the better the color rendering property. A light source with RA = 100 reproduces all colors very well. The lower the RA value, the less well the colors are rendered. In bathrooms and dressing rooms with mirrors, we generally recommend the use of luminaires and light sources with a high RA value of at least 90.
RA 70-80: medium color rendering
RA 80-90: good color reproduction
Ra 90-100 very good color reproduction
