Touch dimmer for LED profiles 12V / 24V

PWM SENSOR TOUCH DIMMER for aluminium profiles with plastic cover. Suitable for internal profile heights of 6-11 mm. For profiles with a greater internal height, the dimmer board can be underlaid with a non-conductive material (plastic block, etc.)
The touch dimmer can be placed invisibly behind a profile cover and the connected Flex Strip can be dimmed and switched on and off by touching the plastic cover.
The sensor area is indicated by a blue LED.

Please note: This dimmer only works with direct voltage (DC) and not with conventional 12V halogen transformers, which output a 12V alternating voltage!

How it works
1. touch sensor briefly = light switches on
2. hold sensor = light gets brighter
3. release sensor = the current brightness is saved
4. hold sensor = light dims
5. release sensor = the current brightness is saved
6. processes 2-5 are repeated
7. touch sensor briefly = light switches off

With memory function, i.e. the last setting is saved when switching off (not in the event of a power failure - in this case the module always starts with the switched-off status).

Technical data:
Dimming type: PWM
Wattage: max. 36W (at 12V), 72W (at 24V)
Maximum output current: 3A
Input voltage: 12V...24V direct voltage (DC)
Output voltage: 12V...24V
Dimensions: 42 x 10mm