WALL LAMP WHITE
Prices incl. VAT plus shipping costs
Delivery time 3-5 Workdays
- Order number: SW10918
Wall lamp / facade spotlight
The flat wall lamp with a total of six powerful, warm white PowerLED is available in two color versions. The opposite luminous surfaces result in two cones of light of the same type (UP / DOWN). The electrical connection of the aluminum lamp is made by the built-in driver to 230V mains voltage.
Material: body of powder-coated aluminum, glass
The LED can be replaced by a technically experienced specialist.
Degree of protection: IP54
Illuminant: 2x LED
Bulbs included: yes
System power: 8.8W
Operating voltage of the LED: 200 - 240V
Luminous flux: 2x 240lm
Light color: 3000K (warm white)
Beam angle: 30 + 30 degrees
Color rendering index CRI:> 80
Energy efficiency class: A ++ - A (spectrum A ++ to E)
|Brightness of the light:||up to 500lm|
|Color of the luminaire:||White|
A few information about the technical data
- What is luminous flux?
The luminous flux Φ - measured in lumens (lm) - is the light output of a light source. It describes the power emitted by the light source in all directions in the visible range. To get a rough idea of what this value means, here are a few comparisons:
230V halogen bulb with base GU10, 50W: 345lm
230V halogen bulb with base G9, 60W: 740lm
12V halogen bulb with socket GX5.3 (GU5.3), 35W: 450lm
12V halogen bulb with socket GX5.3 (GU5.3), 50W: 720lm
12V halogen bulb with base G4, 20W: 257lm
12V halogen bulb with base GY6.35, 50W: 840lm
230V halogen rod with base R7s, 100W: 1200lm
- What does color temperature mean?
Roughly speaking, the color temperature indicates how warm or cold especially white light is. The oneness is Kelvin (K). The lower the Kelvin value, the warmer the light gets. The light of a commercial light bulb here would correspond to about 2700K, a candle has about 1500K. The higher the Kelvin value becomes, the colder the blue becomes the light. Daylight is compared with about 7000K. A rough classification of the light color is:
- 2,700 to 3,250 Kelvin: warm white
- 3,250 to 5,250 Kelvin: neutral white
- 5,250 to 8,000 Kelvin: daylight white
- What does the color rendering index called RA or CRI?
The color rendering index indicates the degree of correspondence of the seen body color with its appearance under the respective reference light source. The smaller the deviation, the better the color rendering property. A light source with RA = 100 reproduces all colors very well. The lower the RA value, the less well the colors are rendered. In bathrooms and dressing rooms with mirrors, we generally recommend the use of luminaires and light sources with a high RA value of at least 90.
RA 70-80: medium color rendering
RA 80-90: good color reproduction
Ra 90-100 very good color reproduction