RECESSED LUMINAIRE 350mA
Prices incl. VAT plus shipping costs
- Order number: SW10768
Square LED recessed wall light with built-in low-voltage LED. This lamp requires an external LED converter. Is used as general lighting for illuminating corridors, passageways, as night light, as an orientation light and much more.
The LED can be changed by the manufacturer.
The lamp offers three types of mounting:
1.Direct installation in cavity walls using external mounting brackets
2. Installation in masonry using the optional flush-mounted frame
3. Installation in masonry or concrete using the optional installation box
Available surfaces: matt white and gray
The aim of an inexpensive installation should be to connect as many lights as possible to an LED converter. The type of wiring "serial wiring" must be taken into account. If this is not possible, each luminaire will e.g. operated with a 4W LED converter and connected to 230V.
Principle of serial wiring:
This lamp is equipped with a mini AMP connector. For simple wiring, we offer suitable distributors and cable extensions in the Accessories section.
Procedure for the rough calculation of the required 350mA LED converter:
- Multiply the number of lights by the forward voltage
-> Example: 6 lights should be used: 6 x 2.9V = 17.4V
- Multiply the number of lights by the wattage
-> Example: 6 lights should be used: 6 x 1W = 6W
Result: The LED converter must have a power of at least 6W and be able to deliver an output voltage of 17.4V.
Surfaces: white or gray
Illuminant: 1x LED
LED power: 1W
Operating current of the LED: 350mA
Forward voltage of the LED: 2.9V
Bulbs included: yes
External converter necessary: yes
Luminous flux: 40lm
Light color: either 3000K (warm white) or 4000K (neutral white)
Beam angle: -
Color rendering index CRI:> 80
Energy efficiency class: A ++ (spectrum A ++ to E)
A few information about the technical data
- What is luminous flux?
The luminous flux Φ - measured in lumens (lm) - is the light output of a light source. It describes the power emitted by the light source in all directions in the visible range. To get a rough idea of what this value means, here are a few comparisons:
230V halogen bulb with base GU10, 50W: 345lm
230V halogen bulb with base G9, 60W: 740lm
12V halogen bulb with socket GX5.3 (GU5.3), 35W: 450lm
12V halogen bulb with socket GX5.3 (GU5.3), 50W: 720lm
12V halogen bulb with base G4, 20W: 257lm
12V halogen bulb with base GY6.35, 50W: 840lm
230V halogen rod with base R7s, 100W: 1200lm
- What does color temperature mean?
Roughly speaking, the color temperature indicates how warm or cold especially white light is. The oneness is Kelvin (K). The lower the Kelvin value, the warmer the light gets. The light of a commercial light bulb here would correspond to about 2700K, a candle has about 1500K. The higher the Kelvin value becomes, the colder the blue becomes the light. Daylight is compared with about 7000K. A rough classification of the light color is:
- 2,700 to 3,250 Kelvin: warm white
- 3,250 to 5,250 Kelvin: neutral white
- 5,250 to 8,000 Kelvin: daylight white
- What does the color rendering index called RA or CRI?
The color rendering index indicates the degree of correspondence of the seen body color with its appearance under the respective reference light source. The smaller the deviation, the better the color rendering property. A light source with RA = 100 reproduces all colors very well. The lower the RA value, the less well the colors are rendered. In bathrooms and dressing rooms with mirrors, we generally recommend the use of luminaires and light sources with a high RA value of at least 90.
RA 70-80: medium color rendering
RA 80-90: good color reproduction
Ra 90-100 very good color reproduction