RECESSED LUMINAIRE 700mA
- Order number: SW10757
Recessed luminaire
Narrow LED recessed wall light with built-in low-voltage LED. This lamp requires an external 700mA LED converter. Is used as general lighting for illuminating corridors, passageways, as night light, as an orientation light and much more.
The lamp offers two types of mounting:
1.Direct installation in cavity walls using external mounting brackets
2. Installation in masonry or concrete using the optional installation box
Material: aluminum
Available surfaces: white matt
The aim of an inexpensive installation should be to connect as many lights as possible to an LED converter. The type of wiring "serial wiring" must be taken into account. If this is not possible, each luminaire will e.g. operated with a 4W LED converter and connected to 230V.
Principle of serial wiring:
Procedure for the rough calculation of the required LED converter (here 700mA converter):
- Multiply the number of lights by the forward voltage
-> Example: 3 lights should be used: 3 x 3.15V = 9.45V
- Multiply the number of lights by the wattage
-> Example: 3 lights should be used: 3 x 2.2W = 6.6W
-------------------------------------------------- ----------------------------------------------
Result: The 700mA LED converter must have a power of at least 6.6W and be able to deliver an output voltage of 9.45V.
Technical specifications:
Illuminant: 1x LED
LED power: 2.2W
Operating current of the LED: 700mA
Forward voltage of the LED: 3.15V
Bulbs included: yes
External converter necessary: yes
Luminous flux: 6lm
Light color: 3000K (warm white)
Beam angle: -
Color rendering index CRI:> 80
Dimmable: yes
Energy efficiency class: A ++ (spectrum A ++ to E)
A few information about the technical data
- What is luminous flux?
The luminous flux Φ - measured in lumens (lm) - is the light output of a light source. It describes the power emitted by the light source in all directions in the visible range. To get a rough idea of what this value means, here are a few comparisons:
Candle: 12lm
230V halogen bulb with base GU10, 50W: 345lm
230V halogen bulb with base G9, 60W: 740lm
12V halogen bulb with socket GX5.3 (GU5.3), 35W: 450lm
12V halogen bulb with socket GX5.3 (GU5.3), 50W: 720lm
12V halogen bulb with base G4, 20W: 257lm
12V halogen bulb with base GY6.35, 50W: 840lm
230V halogen rod with base R7s, 100W: 1200lm
- What does color temperature mean?
Roughly speaking, the color temperature indicates how warm or cold especially white light is. The oneness is Kelvin (K). The lower the Kelvin value, the warmer the light gets. The light of a commercial light bulb here would correspond to about 2700K, a candle has about 1500K. The higher the Kelvin value becomes, the colder the blue becomes the light. Daylight is compared with about 7000K. A rough classification of the light color is:
- 2,700 to 3,250 Kelvin: warm white
- 3,250 to 5,250 Kelvin: neutral white
- 5,250 to 8,000 Kelvin: daylight white
- What does the color rendering index called RA or CRI?
The color rendering index indicates the degree of correspondence of the seen body color with its appearance under the respective reference light source. The smaller the deviation, the better the color rendering property. A light source with RA = 100 reproduces all colors very well. The lower the RA value, the less well the colors are rendered. In bathrooms and dressing rooms with mirrors, we generally recommend the use of luminaires and light sources with a high RA value of at least 90.
RA 70-80: medium color rendering
RA 80-90: good color reproduction
Ra 90-100 very good color reproduction
