FACADE LIGHT ANTHRACITE
- Order number: SW10847
Facade spotlight
LED facade spotlight with two-sided radiation and replaceable illuminant.
Material: luminaire body made of powder-coated aluminum, glass
Degree of protection: IP54
Technical specifications:
Illuminant: 2x either halogen or LED
Bulbs included: no
Bulb socket: GU10
Maximum power: 2x 35W
Operating voltage: 230V
Luminous flux: depending on the illuminant used
Light color: depending on the illuminant used
Beam angle: approx. 2x 70 degrees
Color rendering index CRI: depending on the illuminant used
Dimmable: yes, depending on the illuminant used
Energy efficiency class: A ++ - E (spectrum A ++ to E)
Dimensions: (l x w x h) 80 x 80 x 220mm
A few information about the technical data
- What is luminous flux?
The luminous flux Φ - measured in lumens (lm) - is the light output of a light source. It describes the power emitted by the light source in all directions in the visible range. To get a rough idea of what this value means, here are a few comparisons:
Candle: 12lm
230V halogen bulb with base GU10, 50W: 345lm
230V halogen bulb with base G9, 60W: 740lm
12V halogen bulb with socket GX5.3 (GU5.3), 35W: 450lm
12V halogen bulb with socket GX5.3 (GU5.3), 50W: 720lm
12V halogen bulb with base G4, 20W: 257lm
12V halogen bulb with base GY6.35, 50W: 840lm
230V halogen rod with base R7s, 100W: 1200lm
- What does color temperature mean?
Roughly speaking, the color temperature indicates how warm or cold especially white light is. The oneness is Kelvin (K). The lower the Kelvin value, the warmer the light gets. The light of a commercial light bulb here would correspond to about 2700K, a candle has about 1500K. The higher the Kelvin value becomes, the colder the blue becomes the light. Daylight is compared with about 7000K. A rough classification of the light color is:
- 2,700 to 3,250 Kelvin: warm white
- 3,250 to 5,250 Kelvin: neutral white
- 5,250 to 8,000 Kelvin: daylight white
- What does the color rendering index called RA or CRI?
The color rendering index indicates the degree of correspondence of the seen body color with its appearance under the respective reference light source. The smaller the deviation, the better the color rendering property. A light source with RA = 100 reproduces all colors very well. The lower the RA value, the less well the colors are rendered. In bathrooms and dressing rooms with mirrors, we generally recommend the use of luminaires and light sources with a high RA value of at least 90.
RA 70-80: medium color rendering
RA 80-90: good color reproduction
Ra 90-100 very good color reproduction