Electronic transformer 0-70VA, suitable for LEDs
- Order number: SW10742
Electronic transformer 0-70VA, suitable for LEDs
Electronic transformer which, due to its design, is suitable for both LED and halogen lamps.
Constant voltage: 12V
Maximum power: 70W
Minimum power: 0W
Input voltage: 220 - 240V, AC
Dimmable: yes
Degree of protection: IP20
Short circuit protection: yes
Overload protection: yes
Overheating protection: yes
Dimensions: l x w x h = 115 x 45 x 28mm
A few information about the technical data
- What is a constant voltage converter
This type of converter keeps its output voltage constant at a value of, for example, 12V or 24V and, depending on the load connected, varies the output current up to its maximum technical value.
- How is the wiring of the LEDs to be connected to a constant-voltage converter
The LEDs to be connected are wired in parallel.
- Dimming
Dimmable contant voltage converters can be dimmed with trailing or leading edge dimmers. When selecting the dimmer, pay attention to the required minimum load of the dimmer.
- Minimum load of the converter
Some constant voltage converters require a minimum load. That the sum of the individual wattages of the LEDs to be connected must reach or exceed this value. Otherwise, a safe dimming operation is not guaranteed and there may be a flicker.